nach Maß

How to avoid costly flat tires

These tips will save you a lot of money and nerves

A flat tire is not only an inconvenience, it can also be expensive. The cost of a new tire can quickly run into several hundred Euros.

When you have a flat tire on the road, you not only have to deal with maintenance and repair, but also with increased wear and tear, fuel consumption and possible damage.

If you want to avoid having a flat tire on the road, there are a few things you can do to prevent it from happening.


The first step in preventing flat tires is to choose the right tire size and quality for your vehicle. Tire size is made up of several specifications that describe the width, height-to-width ratio, construction type, rim diameter, load capacity and speed of the tire.

This information is on the side of the tire or in the vehicle documentation. Always use tire sizes approved or tested by the manufacturer. They are the best fit for your vehicle. Using the wrong tire size can lead to problems with driving safety, tire wear, vehicle inspection or insurance.

There are different types of tires that differ in rubber compound, tread design and puncture protection. Depending on whether you drive on dry, wet or winter roads, you should pick a suitable tire.

Pay attention not only to the price. Also consider the performance, durability, and safety of the tire. High-quality tires usually have better grip, longer life, and are more resistant to sharp objects than cheap tires.


The second step in preventing punctures is to maintain proper tire pressure. Tire pressure affects not only the rolling resistance, grip, and handling of the tire, but also its vulnerability. Under inflation can lead to increased wear, increased fuel consumption and an increased risk of punctures. Over inflation can result in less grip, less suspension and less stability.

The correct inflation pressure will vary depending on the size, quality, and load of the tire. Tire pressure is a function of tire size, quality and load, and should be regularly checked and adjusted. The recommended values can be found on the side wall of the tire or in the owner’s manual for your vehicle.


The third step in preventing punctures is to check your tires regularly. It is important to check not only the inflation pressure, but also the tread and sidewall condition.

Look for cracks, cuts, dents or foreign objects that could damage the tires. The tread of the tire should also be inspected and measured.

The tread provides good grip on wet roads and prevents aquaplaning. By law, summer tires must have a minimum tread depth of 1.6 mm and winter tires must have a minimum tread depth of 4 mm. If the tread is worn or the tread wear indicator lights up, the tire must be replaced.


A flat tire kit is a useful tool for repairing a flat tire yourself. The fourth step is to use the jacks, spanners, and sealants in the kit to fix the flat tire.

In an emergency, you can use a flat tire kit to fix a flat tire yourself by following these steps:

  • Park your car safely on the side of the road.
  • Turn on your hazard lights.
  • Engage the parking brake.
  • Use the jacks, spanners, and sealants in the kit to fix the flat tire.
  • Inflate the tire to the correct pressure.
  • Lower the car and remove the jack.
  • Put away the tools and drive away.


Getting a flat tire can be annoying. It can also be dangerous and expensive. To avoid a flat tire, you should follow some tips presented here, which will significantly reduce the risk of a flat tire. This is not only good for your budget, but also for your nerves.

Always remember to use the right size tires, keep tires properly inflated, and check tires regularly. In this way, you can significantly reduce the risk of a flat tire and drive with peace of mind.